XL-7 4WD V6-2.7L (2003)
7. Remove strut support nuts (1). Hold strut by hand so that it will not fall off.
8. Remove strut.
Installation
1. Install strut by reversing removal Steps (1 - 8). Insert bolts in such a direction as shown in the figure.
2. Torque all fasteners to specifications.
Tightening torque
Strut support nut (a): 55 Nm (5.5 kgf-m, 40.0 ft. lbs.)
Strut bracket bolt (b): 95 Nm (9.5 kgf-m, 69.0 ft. lbs.)
Strut tower bar mounting bolt (c): 50 Nm (5.0 kgf-m, 36.5 ft. lbs.)
CAUTION: Don't twist hose when installing brake hose. Install E-ring (1) as far as bracket end surface (2) as shown in the figure.