XL-7 4WD V6-2.7L (2003)
7. Using special tools, draw out axle shafts. For vehicle equipped with ABS, remove wheel speed sensor from axle housing before drawing out axle
shaft.
NOTE: Use care not to pull brake back plate along with shaft.
Special tool
(B): 09942-15510
(C): 09943-35512
8. For vehicle without ABS, remove LSPV stay (1) from axle housing.
9. Remove brake back plate from rear axle housing.
10. Disconnect brake pipe (3) from flexible hose (1) and remove E-ring (2) (front side).
11. Remove brake pipe clamps and pipes from axle housing (2) and disconnect breather hose (1) from axle housing (2).
