XL-7 4WD V6-2.7L (2003)
Windshield: Procedures
WINDSHIELD REMOVAL AND INSTALLATION
Prepare spare parts, an adhesive and tools referring to Windshield Construction.
REMOVAL
1. Clean both inside and outside of glass and around it.
2. Remove wiper arms and garnish.
3. Using tape, cover body surface around glass to prevent any damage.
4. Remove rear view mirror, sunvisor, and front pillar trims (right and left).
5. If necessary, remove instrument panel. Refer to Instrument Panel Removal and Installation.
6. If necessary, remove head lining. Refer to Head lining Removal and Installation.
7. Remove (or cut) windshield molding all around until windshield edge comes out.
8. Drill hole with eyeleteer (1) through adhesive and let piano string through it.