XL-7 4WD V6-3.6L (2008)
Front Door Window Regulator: Service and Repair
Front Side Door Window Regulator Replacement
Removal Procedure
1. Remove the front door outside handle.
2. Remove the front door window run channel assembly.
3. Remove the front door lower speaker.
4. Disconnect the mirror electrical connector.
5. Disconnect the 4 electrical connector rosebuds (2 at the mirror and 2 under the speaker).
6. Loosen the 2 rear module bolts.
7. Remove the 4 remaining module bolts.
8. Remove the 3 latch bolts from the door shut face.
9. Disconnect the door harness at the door jamb.
10. Remove the window regulator module from the door.
Installation Procedure