suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

ABOUT US
Engine Oil Dip Stick - Dip Stick Tube|Service and Repair|Page 4114 > < Engine - Noise/Damage After Oil Filter Change|Page 4110

XL-7 4WD V6-3.6L (2008)

Page 1
background image

Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator and Tube Replacement 

Removal Procedure

1. Turn the ignition OF
2. Remove the oil level indicator from the oil level indicator tube.
3. Remove the oil level indicator tube bolt.
4. Remove the oil level indicator tube up through the exhaust manifold.
5. If you are replacing only the oil level indicator tube seal, remove and discard the old seal.

Installation Procedure

Engine Oil Dip Stick - Dip Stick Tube|Service and Repair|Page 4114 > < Engine - Noise/Damage After Oil Filter Change|Page 4110