XL-7 4WD V6-3.6L (2008)
Fuel Gauge Sender: All Technical Service Bulletins
Recall 99-NF - Fuel Sender Harness Connector Corrosion
XL7
Section Title: Engine
TSB No. TS 23 01188
Division: Automotive
Category: Technical
SUBJECT:
INCORRECT FUEL SENDER HARNESS CONNECTOR PLUGS
(EMISSIONS CAMPAIGN 99-NF)
MODEL(S):
XL7
YEAR:
2008
AFFECTED VIN(S):
2S3D_417_86100013~2S3D_417_86108791
ALL 2008 VEHICLES MANUFACTURED BEFORE SEPT. 18, 2007
CONDITION:
On certain 2008 model year XL7 vehicles, there are two unused pin cavities within the fuel sender wiring harness connector. To prevent moisture from
entering the harness connector, the unused pin cavities are filled with a plug. The plug used in these cavities may be under-size and allow moisture to
enter the harness connector.
CORRECTION:
Replace the two plugs in the fuel sender wiring harness connector per procedure below. If corrosion is found in the connector terminals, replace the
corroded terminals. See above.
WARRANTY:
Please refer to the Campaign Bulletin SC-45 for claim submission instructions and labor times
PART(S) INFORMATION:
