XL-7 4WD V6-3.6L (2008)
3. Use compressed air in order to remove any debris from the around the area where the fuel injectors enter the lower intake manifold.
4. Remove the fuel rail bolts.
CAUTION:
^
Remove the fuel rail assembly carefully in order to prevent damage to the injector electrical connector terminals and the injector
spray tips. Support the fuel rail after the fuel rail is removed in order to avoid damaging the fuel rail components.
^
Cap the fittings and plug the holes when servicing the fuel system in order to prevent dirt and other contaminants from entering open
pipes and passages.