XL-7 4WD V6-3.6L (2008)
5.
Remove the cavity plugs from terminal number 6 and 12 with suitable tweezers or small needle nose pliers.
6.
Insert the new cavity plug (89215-78J00) into terminal 6 and 12 cavity as far as possible with finger tip pressure (no tool required).
7.
Re-connect the fuel sender harness connector. Be sure the harness connector halves are fully seated and a click is heard when the lock tab engages.
8.
Write dealer number on campaign sticker and place campaign sticker on the core support. Recall is complete.
Disclaimer