XL-7 4WD V6-3.6L (2008)
1. Install and position the transmission mount (1).
CAUTION:
Refer to [Fastener Notice]
2. Install the transmission mount-to-frame bolts (3).
Tightening torque
Tighten the bolt to 50 Nm (37 ft. lbs.).
3. Install the transmission mount-to-bracket through bolt (2), while aligning the transmission mount to the bracket.
Tightening torque
Tighten the bolt to 110 Nm (81 ft. lbs.).
4. Lower the stabilizer shaft and connect the stabilizer links.
Tightening torque
Tighten the stabilizer link nuts to 65 Nm (48 ft. lbs.).
5. Lower the vehicle.