XL-7 4WD V6-3.6L (2008)
Differential Mount: Service and Repair
Differential Housing Support Bushing Replacement (Rear)
Differential Housing Support Bushing Replacement (Rear)
Special Tool
J-45725 Cradle Bushing Replacer
Removal Procedure
1. Raise and support the vehicle.
2. Remove the rear differential assembly.
3. Mark a reference point on the frame and old bushing at the 12 and 6 o'clock position to use to alignment the new bushing.
4. Position the J-45725-1A (1) on the bushing (2).
5. Position the J-45725-2A (1) on the frame.
NOTE:
Apply a small amount of grease on the threaded rod to lubricate the nuts when turning the nuts.
6. Install the threaded rod, bearing and washers.