XL-7 4WD V6-3.6L (2008)
Disclaimer
Technical Service Bulletin # 08-04-21-002
Date: 080401
Drivetrain - Fluid Leak fromTransfer Case Area
TECHNICAL
Bulletin No.: 08-04-21-002
Date: April 01, 2008
Subject:
Fluid Leak at Transfer Case Weep Hole (Replace Front Wheel Drive Intermediate (Inner) Shaft Seal)
Models:
2008 Buick Enclave
2008 Chevrolet Equinox Sport
2007-2008 GMC Acadia
2008 Pontiac Torrent GXP
2007-2008 Suzuki XL-7
with 6T70/75 AWD/PTU Automatic Transmission (RPO MH4 or MH6) for GM or AF33-5 AWD/PTU Automatic Transmission (RPO M45) for Suzuki
and Getrag 760/790 Transfer Case
Condition
Some customers may comment on a fluid leak from the transmission or transfer case area. Technicians may find that the fluid is leaking from the transfer
case/PTU weep hole farthest from the transmission, near the passenger side.
Cause
The front wheel drive intermediate (inner) shaft seal may be leaking. Due to low ambient temperatures with various runout conditions between the
intermediate drive shaft and the input shaft, the seal material may not properly seal fluid.
Correction
Replace the front wheel drive intermediate (inner) shaft seal with a new designed seal.
Important:
Selecting the correct replacement seal is critical due to a 2008 mid-model design update. Use the information below to determine which seal to use.
For additional information, refer to New Product Information in the Getrag 760/790 Transfer Case category in SI.
For Acadia and Enclave
^
For vehicles built prior to VIN Breakpoint 8J217964, use first design seal, P/N 19180998 (Green).
^
For vehicles built on or after VIN Breakpoint 8J217964, use second design seal, P/N 19206322 (Green).
For Equinox and Torrent
^
For vehicles built prior to VIN Breakpoint 86075818, use first design seal, P/N 19180998 (Green).
^
For vehicles built on or after VIN Breakpoint 86075818, use second design seal, P/N 19206322 (Green).
For Suzuki XL-7
^
For vehicles built prior to VIN Breakpoint 86115983, use first design seal, P/N 19180998 (Green).
