XL-7 Limited 4WD V6-2.7L (2002)
Sunroof / Moonroof Motor: Procedures
Sliding Roof Motor
Removal
1. Remove head lining, referring to "Head Lining Removal and Installation".
2. Disconnect coupler (3) and remove sliding roof motor assembly (1) by removing 3 screws (2).
CAUTION: After removing sliding motor assembly, do not move guide and link.
Installation
1. Connect coupler and push the "CLOSE" side of the side switch.
2. Match marks (holes (2)) for completely closed position of sliding roof motor assembly (1).
3. Install sliding roof motor assembly (1).
4. Install head lining, referring to "Head Lining Removal and Installation".
