XL-7 Limited 4WD V6-2.7L (2002)
Cruise Control Switch: Testing and Inspection
Cruise Main Switch
Cruise Main Switch
1. Disconnect battery negative cable (-) at battery.
2. Disconnect connector from cruise main switch (1).
3. Remove cruise main switch (1) from instrument panel.
4. Check for resistance between "IG" and "LOAD" terminals. If check result is not satisfactory, replace.
Cruise main switch specification
Switch button released: Infinity
Switch button pressed: About 3.9 kOhm
5. Install cruise main switch (1) to instrument panel and connect connector securely.
