XL-7 Limited 4WD V6-2.7L (2002)
9. Disconnect water hoses (inlet hose (1), outlet hose (2) and reservoir hose (3) from radiator (4).
10. Remove radiator.
Installation
Reverse removal procedures.
NOTE:
^
Refill cooling system with proper coolant.
^
Adjust cooling fan belt tension to specification.
^
With A/T (Automatic Transmission) equipped vehicle, check A/T fluid level.
^
After installation, check each joint for leakage.
Inspection
Check radiator for leakage or damage. Straighten bent fins, if any.
Cleaning
Clean frontal area of radiator cores.