XL-7 Limited 4WD V6-2.7L (2002)
Control Assembly: Service and Repair
Heater Control Lever Assembly
Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system. Refer to "Disabling Air Bag System:".
3. Remove mode control switch, refer to "Heater Mode Control Switch Removal and Installation:".
4. Remove glove box.
5. Disconnect control cables (3) from blower motor unit (2) and heater unit (1).
6. Disconnect heater blower motor switch (1) connector at coupler.
7. Remove heater control lever assembly (2).
Installation
1. Install in reverse order of removal procedure, adjustment the following items.
a. Move control lever (1) to FRESH position (2).