XL-7 Limited 4WD V6-2.7L (2002)
Drive Belt: Adjustments
Cooling Fan/Generator Belt Tension
Check and Adjustment
WARNING: Disconnect negative cable at battery before checking and adjusting belt tension.
1. Inspect belt for cracks, cuts, deformation, wear and cleanliness.
2. Check belt for tension. Belt is in proper tension when it deflects 6 to 8 mm (0.24 - 0.31 inch) under thumb pressure (about 10 kg or 22 lb.).
Cooling fan belt tension (as deflection/10 kg (22 lbs.) "a": 9 - 11 mm (0.35 - 0.43 inch)
NOTE: When replacing belt with a new one, adjust belt tension to 7 - 9 mm (0.28 - 0.35 inch).
3. If belt is too tight or too loose, adjust it to proper tension by displacing generator position.
4. Tighten generator adjusting bolt and pivot bolt.
5. Connect negative cable at battery terminal.
