XL-7 Limited 4WD V6-2.7L (2002)
-
SDM
-
Check for external damage such as deformation, scratch, crack, peeled paint, etc.
-
Check that SDM cannot be installed properly due to a cause in itself. (There is a gap between SDM and SDM plate, or it cannot be fixed
securely.)
-
Check that connector or lead wire of SDM has a scorching, melting or damage.
-
Check SDM connector and terminals for tightness.
-
Check SDM sets a DTC and the diagnostic flow leads to a malfunctioning SDM.
-
Air bag wire harness and connections
-
Check for damages, deformities or poor connections. Refer to "Inspection of intermittent and Poor Connections". See: Air Bag
Systems/Testing and Inspection/Component Tests and General Diagnostics/Diagnostic Strategies/Intermittent and Poor Connections
-
Check wire harness clamps for tightness.
-
Forward sensor
-
Check sensor (1), sensor bracket (2), and front panel (3) for damage bend or rust.
-
Check that connector (4) or lead wire (5) of forward sensor has a scorching, melting or damage.
-
Seat belt pretensioner
-
Check for dents, cracks, damage or fitness
-
Check harness and connector for damage or tightness.