XL-7 Limited 4WD V6-2.7L (2002)
Throttle Valve Cable/Linkage: Adjustments
A/T Throttle Cable Adjustment
1. Pull inner cable (3) by force of 2 N (0.2 kgf, 0.45 lbs.) or less to be no slack of inner cable with A/T throttle cable (1) curved as shown in the
figure.
2. Fix stopper (2) to inner cable (3) with clearance "a".
A/T throttle cable adjusting position (clearance) "a": 0.8 - 1.5 mm (0.03 - 0.06 inch)
3. Warm up engine and transmission to normal operating temperature.
4. Make sure that accelerator cable is adjusted as specified.
5. With throttle valve closed, check clearance "c", which should be within the following specification, of A/T throttle cable (1). If it is out of
specification, adjust it by turning cable adjusting nut (2).
A/T throttle cable adjusting position (clearance) "c": 0.8 - 1.5 mm (0.03 - 0.06 inch)
6. Tighten lock nut (3) securely.