XL-7 Limited 4WD V6-2.7L (2002)
Tailgate Window Glass: Service and Repair
Back Door Glass Removal and Installation
Refer to Windshield Removal and Installation. Procedures and cautions are basically the same. However, note the following.
-
Before applying primer to glass edge, install molding according to installing position shown in the figure.
-
Observe the following precautions when applying adhesive along glass edge.
-
Adhesive should be applied evenly especially in height.
-
Be careful not to damage primer.
-
Press glass against body quickly after adhesive is applied.
Adhesive amount specification (back door glass)
Height "b": 15 mm (0.59 in.)
Width "c": 8 mm (0.31 in.)
Width "d": 16 mm (0.63 in.)
Clearance "e": 1 mm (0.04 in.)
