XL-7 Plus 2WD V6-2.7L (2001)
The fluid level check at room temperature (20 - 30° C (68 - 86° F)) performed after repair or fluid change before test driving is just preparation for
level check of normal operating temperature. The checking procedure itself is the same as that described previously. If the fluid level is between FULL
COLD and LOW COLD, proceed to test drive. And when the fluid temperature has reached the normal operating temperature, check fluid level again
and adjust it as necessary.
FLUID CHANGE
1. Lift up vehicle.
2. With engine is cool, remove drain plug (1) from oil pan and drain A/T fluid.
3. Install drain plug (1).
Tightening torque
A/T fluid drain plug (a): 23 Nm (2.3 kg-m, 17.0 ft. lbs.)
4. Lower vehicle and fill proper amount of an equivalent of DEXRON III.
5. Check fluid level.
Fluid specification: An equivalent of DEXRON III
Fluid capacity