XL-7 Standard 2WD V6-2.7L (2001)
Sunroof / Moonroof Motor: Testing and Inspection
Sliding Roof Motor Inspection
1. Remove head lining. Remove sliding roof motor assembly (1).
2. Connect known-good sliding roof switch (2) to sliding roof motor assembly.
3. Connect 12 V battery positive terminal to terminal "A" of motor assembly (1) and battery negative terminal to terminal "B" of motor assembly (1).
4. Check that the sliding roof motor (1) runs according to the movement of the sliding roof switch (2).
5. If motor does not operate as above, replace sliding roof motor assembly (1).
