XL-7 Standard 2WD V6-2.7L (2001)
NOTE: Make sure that boots are fit into groove securely.
3. Install brake flexible hose as shown in the figure and torque hose mounting bolt (1) to specification
Tightening torque
Flexible house bolt (a): 23 Nm (2.3 kg-m, 17.0 ft. lbs.)
4. Torque wheel nuts to specification.
Tightening torque
Wheel nut (a): 100 Nm (10.0 kg-m, 72.5 ft. lbs.)
5. After completing installation, fill reservoir with brake fluid and bleed brake system. Perform brake test and check each installed part for oil
leakage.
Tightening torque
Bleeder plug: 8.0 Nm (0.8 kg-m, 6.0 ft. lbs.)
