XL-7 Standard 2WD V6-2.7L (2001)
Water Pump: Service and Repair
REMOVAL
1. Disconnect negative (-) cable at battery.
2. Drain engine oil.
3. Drain coolant.
4. Remove timing chain cover.
5. Remove water pump assembly (1).
INSPECTION
CAUTION: Do not disassemble water pump. If any repair is required on pump, replace it as assembly.
^
Rotate water pump by hand to check for smooth operation. If pump does not rotate smoothly or makes abnormal noise, replace it.
^
Inspect water pump impeller for damage. Replace as necessary.
INSTALLATION
