XL-7 Standard 2WD V6-2.7L (2001)
Blower Motor: Testing and Inspection
Rear Blower Motor
REAR BLOWER MOTOR ASSEMBLY
1. Check continuity between two terminal as shown.
If check results are no continuity, replace rear blower motor assembly (1).
2. Check operate and current.
a. Fix rear blower motor assembly (1) by using vise.
b. Connect battery to rear blower motor assembly (1) as shown.
c. Check that there is smoothly operates and no noise.
d. Check that ammeter indicates specified current.
If measure current is incorrect, replace blower motor assembly.
Rear blower fan motor specified current at 12 V : 16 A maximum
