XL-7 Standard 2WD V6-2.7L (2001)
1.
-
The male terminal and female terminal are identified by a double enclosure and a single one respectively.
-
The intermediate connector which connects harnesses is shown by both shapes of the male terminal and the female terminal but the connector
to be connected directly to the equipment is shown by the shape of the connector on the harness side.
-
The connectors described are always "harness side connectors" which are viewed from the direction as shown at the right.
2.
-
There are three types of connectors with respect to the way it is connected and each type is illustrated as shown.