XL-7 Standard 2WD V6-2.7L (2001)
Air Bag(s) Arming and Disarming: Service and Repair
DISABLING AIR BAG SYSTEM
1. Turn steering wheel so that vehicle's wheels (front tires) and pointing straight ahead.
2. Turn ignition switch to "LOCK" position and remove key.
3. Remove "AIR BAG" fuse from "AIR BAG" fuse box (1).
4. Disconnect Yellow connector (2) of contact coil and combination switch assembly.
a. Release locking of lock lever.
b. After unlocked, disconnect to connector.
5. Pull out glove box while pushing its stopper from both right and left sides and disconnect Yellow connector (1) of passenger air bag (inflator)
module.
a. Release locking of lock lever.
b. After unlocked, disconnect to connector.
NOTE: With "AIR BAG" fuse removed and ignition switch ON, "AIR BAG" warning lamp will be ON. This is normal operation and does not indicate
an air bag system malfunction.
ENABLING AIR BAG SYSTEM
1. Turn ignition switch to "LOCK" and remove key.
