XL-7 Standard 2WD V6-2.7L (2001)
1. Install thermostat case (1) to cylinder block with new O-ring.
2. Install water outlet pipe (2) to thermostat case (1) with new O-rings.
3. Install water outlet cap (3) to cylinder heads with new gaskets.
4. Connect heater inlet hose (5) to water outlet cap (3).
5. Connect ECT sensor (4) coupler.
6. Install throttle body and intake manifold.
7. Install radiator outlet pipe (3) to thermostat case with new O-ring.
8. Install radiator inlet and outlet hoses (1, 2).
9. Refill cooling system with proper coolant.
