XL-7 Standard 2WD V6-2.7L (2001)
Air Flow Meter/Sensor: Service and Repair
REMOVAL
1. Disconnect negative cable (-) at battery and coupler (1) from MAF sensor (3).
2. Remove air cleaner outlet hose (2) from throttle body and MAF sensor (3).
3. Remove MAF sensor from air cleaner case.
CAUTION:
-
Don't disassemble MAF sensor.
-
Do not expose MAF sensor to any shock.
-
Do not blow compressed air by using air gun or the like.
-
Do not put linger or any other object into MAF sensor. Malfunction may occur.
INSTALLATION
1. Check MAF sensor seal (1) for deterioration and damage.
