suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 85 > < Diagram Information and Instructions|Page 83
Page 12
background image

-

Always be careful not to handle electrical parts (computer, relay, etc.) in a rough manner or drop them.

-

When performing a work that produces a heat exceeding 80°C in the vicinity of the electrical parts, remove the heat sensitive electrical part(s)
beforehand.

-

Use care not to expose connectors and electrical parts to water which will be a cause of a trouble.

-

When using a tester for checking continuity or measuring voltage, be sure to insert the tester probe from the wire harness side.

WARNING:  This vehicle is equipped with Supplemental Inflatable Restraint Air Bag System.

Service on or around Air Bag System Components or Wiring must be performed only by an authorized Suzuki dealer. Please observe all the
warnings described in the Air Bag System Component and Wiring Location View mentioned in FOREWORD before performing service on or
around Air Bag System Components or Wiring. Failure to follow WARNING could result in unintended air bag deployment or could render
the air bag inoperative. Either of these two conditions may result in severe injury.

Diagram Information and Instructions|Page 85 > < Diagram Information and Instructions|Page 83