XL-7 Standard 4WD V6-2.7L (2002)
1. Install new intake manifold gaskets (1) to cylinder heads.
2. Install intake manifold (1).
Tighten bolts and nuts to specified torque.
Tightening torque
Intake manifold bolt and nut (a): 23 Nm (2.3 kgf-m, 17.0 ft. lbs.)
3. Install throttle body (2) to intake collector (1) with new throttle body gasket.
Tighten bolts and nuts to specified torque.
Tightening torque
Throttle body bolt and nut (b): 13 Nm (1.3 kgf-m, 9.5 ft. lbs.)
4. Install IAC valve, EGR valve (1), EVAP canister purge valve (2), manifold absolute pressure (MAP) sensor and each hoses to intake collector and
throttle body if removed.
Use new gasket, when installing IAC valve and EGR valve.
5. Install throttle body and intake collector assembly to intake manifold with new intake collector gaskets.
