XL-7 Standard 4WD V6-2.7L (2002)
13. With latch of tensioner adjuster No.1 returned and plunger (1) pushed back into body, insert stopper (3) into latch (2) and body.
After inserting it, check to make sure that plunger (1) will not come out.
14. Install timing chain tensioner adjuster No.1 (1).
Tightening torque
Timing chain tensioner adjuster No.1 bolt (d): 11 Nm (1.1 kgf-m, 8.0 ft. lbs.)
15. Pull out stopper (3) from adjuster No.1 (1).
16. Install timing chain guide No.1 (2) and No.2 (1).
Tightening torque
Timing chain guide No.1 and No.2 bolt (e): 9 Nm (0.9 kgf-m, 6.5 ft. lbs.)
