XL-7 Standard 4WD V6-2.7L (2002)
2. Remove heater core pipe clamps (1) and grommet (2).
3. Pull out heater core (1) from unit (2).
Installation
1. Install heater unit by reversing removal procedure, noting the following items.
-
When installing each part, be careful not to catch any cable or wiring harness.
-
When installing steering column assembly referring to "Steering Column Removal and Installation:".
2. Install control cables referring to "Heater Control Cables Removal and Installation:".
3. Fill engine coolant to radiator.
4. Enable air bag system. Refer to "Enabling Air Bag System:".
5. Evacuate and charge system. Refer to "Operation Procedure for Charging A/C with Refrigerant:".
