XL-7 Standard 4WD V6-2.7L (2002)
Ignition Switch: Testing and Inspection
Operation Check
Ignition Switch and Door Switch Circuit
Ignition Switch and Door Switch Circuit
1. Disconnect negative (-) cable at battery.
2. Disconnect coupler of power door lock and keyless entry controller, and connect negative (-) cable at battery.
3. Check that the voltage and resistance between the following terminals are specifications. If check result is satisfactory, this circuit is OK.
Ignition switch and door switch circuit (for keyless entry controller) specification
Interior Light and Ignition Switch Circuit
Interior Light and Ignition Switch Circuit
1. Disconnect negative (-) cable at battery.
2. Disconnect coupler of power door lock and keyless entry controller, and connect negative (-) cable at battery.
3. Check that the voltage and resistance between the following terminals are specifications. If check result is satisfactory, this circuit is OK.
Interior light and ignition switch circuit (for keyless entry controller) specification
