XL-7 Standard 4WD V6-2.7L (2002)
1. Position slit in each bush (2) as shown when press-fitting it.
Bush instillation position
Angle "A": 45° (slit alignment)
2. Position each bush to bracket as shown in the figure
Bush installation position Length "a": 3.0 mm (0.12 inch)
3. Tighten differential front mounting and bracket bolt to specified torque for reinstallation.
Tightening torque
Front mounting bolt (a): 85 Nm (8.5 kgf-m, 61.5 ft. lbs.)
Front mounting bracket bolt (b): 50 Nm (5.0 kgf-m, 36.5 ft. lbs.)