XL-7 Touring 4WD V6-2.7L (2002)
For without sunroof model:
Adhesive is used in head lining. Clear adhesive from head lining and roof after removing roof lining.
CAUTION: Do not remove rear A/C No.2 duct (1) from head lining (2). If perform this prohibited service, head lining (2) will be broken.
Installation
Reverse removal procedure to install head lining noting the following instructions.
-
Set roof harness (1) and rear washer hose (2) to head lining (3) with adhesive tape as shown.
-
For without sunroof model, apply double coated tape (4) to head lining as shown.
