XL-7 Touring 4WD V6-2.7L (2002)
Brake Shoe: Service and Repair
Removal
1. Remove brake drum.
WARNING: Use special care when installing brake shoe return spring. Failure in its proper installation may allow it to springback and
cause personal injury.
2. Remove shoe hold down springs (6) by turning shoe hold down pins (5).
3. Remove upper shoe return spring (1), struts, adjuster (7), adjuster lever (3) and springs (4).
4. Remove brake shoes and lower shoe return spring (8).
5. Remove brake shoes and disconnect parking brake cable (3) from parking brake shoe lever.
6. Remove parking brake shoe lever (2) from brake shoe (3).
Installation