XL-7 Touring 4WD V6-2.7L (2002)
Brake Proportioning/Combination Valve: Service and Repair
LSPV Assembly (If Equipped) Removal and Installation
Removal
1. Clean around reservoir cap and take out fluid with syringe or such.
2. Hoist vehicle.
3. Disconnect brake pipes (2) from LSPV assembly (1).
4. Remove LSPV assembly (1) with spring (2) from vehicle body.
5. Remove spring (2) from lever (5).
CAUTION: LSPV assembly must not be disassembled. Replace with new one if defective.
Installation
CAUTION: LSPV assembly must not be disassembled. Replace with new one if defective. Install by reversing removal procedure, noting the
following.
1. Apply multipurpose grease "A" to upper and lower joint of coil spring.
