XL-7 Touring 4WD V6-2.7L (2002)
Vacuum Brake Booster: Service and Repair
Removal
1. For vehicle equipped with ABS, disconnect brake pipes from ABS actuator.
2. Remove master cylinder assembly.
3. Disconnect brake vacuum hose from brake booster.
4. Disconnect push rod clevis (2) from brake pedal arm (3).
5. Remove attaching nuts (6) and then booster as shown in the figure.
CAUTION: Never disassemble brake booster. Disassembly will spoil its original function. If is found faulty, replace it with new one.
Installation
