XL-7 Touring 4WD V6-2.7L (2002)
-
Never apply water, oil, etc. to deployed air bag (inflator) module and the activated seat belt pretensioner to cool it off and be careful so that water,
oil etc. does not get on the deployed air bag (inflator) module and the activated seat belt pretensioner.
-
After the air bag (inflator) module has been deployed, the surface of the air bag may contain a powdery residue. This powder consists primarily of
cornstarch (used to lubricate the bag as it inflates) and by-products of the chemical reaction. As with many service procedures, you should wear
gloves and safety glasses.
-
When disposing of the deployed air bag (inflator) module and the activated seat belt pretensioner, be sure to seal it in a vinyl bag.
-
When air bag (inflator) module and seat belt pretensioner have been deployed/activated inside the vehicle which is going to be scrapped, leave
them as installed to the vehicle.
-
Be sure to wash your hands with mild soap and water after handling it.
