XL-7 Touring 4WD V6-2.7L (2002)
Wheel Speed Sensor: Service and Repair
Front
Front
Removal
1. Disconnect negative cable from battery.
2. Hoist vehicle and remove wheel.
3. Disconnect front wheel speed sensor connector (1).
4. Remove harness clamp and sensor bolts (2) and remove front wheel speed sensor (1) from knuckle.
CAUTION:
-
Do not pull wire harness when removing front wheel speed sensor.
-
Do not cause damage to surface of front wheel speed sensor and do not allow dust etc. to enter its installation hole.
Installation
1. Check sensor rotor.
2. Install it by reversing removal procedure.
CAUTION:
