XL-7 Touring 4WD V6-2.7L (2002)
Installation
Reverse removal sequence to install knuckle, wheel spindle oil seal and drive shaft bearing, noting the following points.
^
For 4WD vehicle, Install drive shaft bearing (1) to wheel spindle (2) by using special tool.
Special tool
(A): 09913-80112
Drive shaft bearing installing position (Depth "a",)
"a": 1.75 - 2.50 mm (0.069 - 0.098 inch)
^
When installing wheel spindle to knuckle, coat their mating surfaces with sealant "A".
"A": Sealant 99000-31110
^
For 4WD vehicle, fill recess in wheel spindle with about 10 g lithium grease "B".
"B" Grease 99000-25010
^
Tighten wheel spindle nut to specified torque.
Tightening torque
Wheel spindle nut (a): 50 Nm (5.0 kgf-m, 36.5 ft. lbs.)
