XL-7 Touring 4WD V6-2.7L (2002)
Suspension Travel Bumper: Service and Repair
Bump Stopper / Spring Rubber Seat Removal and Installation
Removal
1. Remove coil spring.
2. Remove spring rubber seat (1).
3. Remove bump stopper (1), using special tool (A).
Special tool
(A): 09941-66010
Installation
1. Tighten bump stopper (1) to specified torque, using special tool (A).
Special tool
(A): 09941-66010
Tightening torque
Bump stopper
(a): 50 Nm (5.0 kgf-m, 36.5 ft. lbs.)
2. Install spring rubber seat.
3. Install coil spring.
