4 Runner 2WD L4-144.4 2366cc 2.4L SOHC (22R-E) (1990)
(c) Using SST, remove the adjusting nut - SST 09607-60020
(d) Remove the hub and disc together with the outer bearing and thrust washer.
6. REMOVE OIL SEAL AND INNER BEARING
(a) Using a screwdriver, pry out the oil seal.
(b) Remove the inner bearing from the hub.
INSPECTION AND REPAIR OF FRONT AXLE HUB
1. INSPECT BEARINGS
-
Clean the bearings and outer races and inspect them for wear or damage.
2. REPLACE BEARING OUTER RACES
(a) Using a brass bar and hammer, drive out the bearing outer race.