4 Runner 2WD L4-144.4 2366cc 2.4L SOHC (22R-E) (1990)
1. REMOVE REVERSE RESTRICT PIN
(a) Using SST, remove the screw plug.
SST 09313-30021
(b) Using a pin punch and a hammer, drive out the slotted spring pin.
(c) Pull off the lever housing and slide out the shaft.
2. INSPECT REVERSE RESTRICT PIN
Turn and push the reverse restrict pin by hand while applying force in axial direction.
3. INSTALL REVERSE RESTRICT PIN
(a) Install the lever housing.
(b) Using a pin punch and a hammer, drive in the slotted spring pin as shown.
(c) Apply liquid sealer to the plug.