4 Runner 2WD L4-144.4 2366cc 2.4L SOHC (22R-E) (1990)
/Page-844001.png)
Output Shaft Bearing: Service and Repair
G40, G57 & G58 Transmissions
REPLACEMENT OF BUSHING
(2WD)
IF NECESSARY, REPLACE BUSHING
(a) Remove the oil seal and dust deflector.
(b) Heat the extension housing end to 80 - 100°C (176 - 212°F) in an oil bath.
(c) Using SST, remove the bushing and install a new bushing.
SST 09307-30010
