4 Runner 2WD L4-144.4 2366cc 2.4L SOHC (22R-E) (1990)
/Page-843003.png)
2. INSTALL THIRD GEAR AND CLUTCH HUB NO.2 ON OUTPUT SHAFT
(a) Apply gear oil to the shaft.
(b) Place the synchronizer ring on the gear and align the ring slots with the shifting keys.
(c) Using a press, install the 3rd gear and clutch hub No.2.
3. INSTALL SNAP RING
Select a snap ring that will allow minimum axial play, and install it on the shaft.
4. MEASURE THIRD GEAR THRUST CLEARANCE
Using a feeler gauge, measure the 3rd gear thrust clearance.
Standard clearance:
0.10 - 0.25 mm (0.0039 - 0.0098 in.)
