4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Radiator: Service and Repair
Removal
2TR-FE COOLING: RADIATOR: REMOVAL
1. REMOVE UPPER RADIATOR SUPPORT SEAL See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
2. REMOVE FRONT BUMPER COVER LOWER See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. DRAIN ENGINE COOLANT See: Coolant/Service and Repair
5. REMOVE FRONT BUMPER COVER
(a) Remove the front bumper cover See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Removal.
6. REMOVE UPPER FRONT BUMPER RETAINER
(a) Remove the 3 bolts and upper front bumper retainer.
7. REMOVE RADIATOR SIDE DEFLECTOR RH
(a) Using a clip remover, detach the 3 claws and remove the clip. Then move the side deflector so that the radiator can be removed in the step
below.
8. REMOVE RADIATOR SIDE DEFLECTOR LH
(a) Using a clip remover, detach the 3 claws and remove the clip. Then move the side deflector so that the radiator can be removed in the step
below.
9. REMOVE RADIATOR RESERVOIR
(a) Disconnect the reservoir hose from the radiator.
(b) Remove the 3 bolts and radiator reservoir.
10. REMOVE FAN SHROUD