4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Audible Warning Device: Service and Repair
Installation
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: INSTALLATION
1. INSTALL SKID CONTROL BUZZER ASSEMBLY
(a) Connect the connector.
NOTICE:
Securely connect the connector.
(b) Attach the clamp to install the buzzer.
NOTICE:
*
Securely insert the clamp into the dash panel.
*
If the buzzer is dropped, replace it.
2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(a) Install the instrument panel safety pad sub-assembly See: Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.