4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Oil Pressure Sender: Service and Repair
Removal
2TR-FE LUBRICATION: OIL PRESSURE SWITCH: REMOVAL
1. REMOVE FRONT BUMPER COVER LOWER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY
(a) Disconnect the oil pressure switch connector.
(b) Using a 24 mm deep socket wrench, remove the oil pressure switch.