4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Maintenance Required Lamp/Indicator: Service and Repair
After Changing The Engine Oil
The Engine oil maintenance data should be reset. Perform the following procedures:
1. Switch the display to the trip meter A when the engine is running.
2. Vehicles without a smart key system
Turn the engine switch off.
Vehicles with a smart key system
Turn the "ENGINE START STOP" switch off.
3. Vehicles without a smart key system
While pressing the trip meter reset button, turn the engine switch to the "ON" position (do not start the engine because reset mode will be
cancelled). Continue to press and hold the button until the trip meter displays "000000".
Vehicles with a smart key system
While pressing the trip meter reset button, turn the "ENGINE START STOP" switch to the IGNITION ON mode (do not start the engine because
the reset mode will be cancelled). Continue to press and hold the button until the trip meter displays "000000".
Navigation Maintenance Item Setting (If equipped)
When the navigation system is turned on, the "Information" screen displays when it is time to replace a part or certain components.
1. Push the "SETUP" button.